Caloritech™ Solid State Power Control Panels come in two different series.
The Caloritech™ CPSS Solid State Power Control Panel with Base Load uses a combination of contactor stages controlled by a step control and an SCR solid state power control for fine tuning. Typically the SCR stage switches 20 to 30% of the total load with contactors making up the balance. The control package automatically determines when extra base load contactor steps need to be brought in or dropped out. Many adjustments such as proportioning band, zero and span, and time delay between stages are field adjustable to fine tune to the process.
The Caloritech™ CPE Full Solid State Power Control Panel is designed for automatic control of electric heaters using proven concepts and procedures. All Caloritech™ control panels can be custom built to meet various environmental requirements including dust, oil, and water, as well as corrosive or hazardous materials. The CPE unit features full SCR control. Multiple backup contactors are used to protect and facilitate wiring to the process heater. Where necessary, Type 12 enclosures include fans and vents to keep ambient temperatures to a safe level.
CPSS Series Specific
CPE Series Specific
Caloritech™ Solid State Power Control Panel Catalogs
Please provide as much detail as possible about how the Caloritech™ CPSS or CPE Full Solid State Control Panel will be used in your application. Please include information about the other equipment (manufacturer, brand, model numbers, etc) you intend to integrate with it and your control requirements.
Please be advised that due to the complex nature of the CP Series Control Panels, some Online RFQ submissions will require additional follow-up with one of our Sales Representatives in order to specify the full scope of your requirements so that we can provide an accurate quote. If you have unique specifications such as sensor type, scan type, control configuration, watt hour metering, current specifications, etc., please provide details in the "Additional Information" field at the end of the form. After submitting your Online RFQ, you will be contacted by the Sales Representative in your area to discuss the full details of your application requirements, who will then provide a quote.
CCI Thermal Technologies Inc. TERMS AND CONDITIONS OF SALE
PRICING: CCI Thermal Technologies, Inc. (the Company) reserves the right to change prices without notice. A minimum 30 days advance notice will be given for changes to published price lists. Unless otherwise stated, prices are free on board the Company factory facility and include the Company’s standard packaging for domestic shipment only.
MINIMUM BILLING: There is no minimum billing policy. However, no discounts apply for orders with a list price of less than $ 100.00.
SALES TAX: Sales or similar taxes are not included in published price lists.
ACCEPTANCE: The Company reserves the right to accept or reject any order from any customer.
TERMS: Standard terms of sale are NET 30 days, on approved credit. Interest of 2% per month (24% per annum) may be charged on overdue accounts. Shipments to non - credit approved customers shall be C.O.D. or C.W.O. as appropriate.
FORCE MAJEURE: The Purchaser acknowledges the Company shall not be liable to the Purchaser for any loss or damage of any sort whatsoever occasioned by the delay or failure to deliver if the said delay or failure is the result of fire, labour disputes, wars, insurrections, riots, or the actions of any duly constituted governmental authority or any other cause whatsoever which is beyond the control of the Company.
OVER/UNDER SHIPMENTS: Due to the special manufacturing requirements for higher volume custom products, such as tubular elements, we reserve the right to ship 95% to 105% of the quantity ordered.
CANCELLATIONS: Requests for cancellation of orders will be honored subject to acceptance of cancellation charges. Such charges will be determined by the Company, in its sole discretion, at the time of request for cancellation.
CLAIMS: At the time of shipment, the Company shall receive the carrier’s Receipt of Shipment in Good Order after which it is the responsibility of the Purchaser to promptly place any and all claims on the carrier for goods lost or damaged in transit. Any other claims, whatsoever, if made to the Company, must be made within 30 days after receipt of shipment.
RETURN OF MATERIAL: Products may only be returned with a written Return of Material Authorization (RMA) from the sales office or factory, and then only in accordance with the Company’s Terms and Conditions. Returns of standard catalog products will normally be subject to a minimum 15% restocking charge. A 25% restocking charge will apply to returns of Ruffneck™ products. Specialty or custom manufactured products will not be considered for restocking. Any repairs or reconditioning necessary to put material in a resalable condition will be charged extra. All returned products must be in first class condition and in their original packaging. Materials are to be shipped prepaid to the location address as authorized.
WARRANTY: Under normal use the Company warrants to the purchaser that defects in material or workmanship will be repaired or replaced without charge for a period of 18 months from date of shipment, or 12 months from the start date of operation, whichever expires first. Any claim for warranty must be reported to the sales office where the product was purchased for authorized repair or replacement within the terms of this warranty. Certain of the Company’ s products may carry additional warranty conditions. Any additional warranty period or conditions will be definitively stated in the Owner’s Manual.
Warranty cont’d: Subject to State or Provincial law to the contrary, the Company will not be responsible for any expense for installation, removal from service, transportation, or damages of any type whatsoever, including damages arising from lack of use, business interruptions, or incidental or consequential damages.
The Company cannot anticipate or control the conditions of product usage and therefore accepts no responsibility for the safe application and suitability of its products when used alone or in combination with other products. Tests for the safe application and suitability of the products are the sole responsibility of the user.
This warranty will be void if, in the judgment of the Company, the damage, failure or defect is the result of:
No warranty applies to paint finishes except for manufacturing defects apparent within 30 days from the date of installation.
The Company neither assumes nor authorizes any person to assume for it any other obligation or liability in connection with the product(s).
The Purchaser agrees that all warranty work required after the initial commissioning of the product will be provided only if the Company has been paid by the Purchaser in full accordance with the terms and conditions of the contract.
The Purchaser agrees that the Company makes no warranty or guarantee, express, implied or statutory, (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE) written or oral, of the Article or incidental labour, except as is expressed or contained in the agreement herein.
LIABILITY: Technical data contained in the catalog or on the website is subject to change without notice. The Company reserves the right to make dimensional and other design changes as required. The Purchaser acknowledges the Company shall not be obligated to modify those articles manufactured before the formulation of the changes in design or improvements of the products by the Company.
The Company shall not be liable to compensate or indemnify the Purchaser, end user or any other party against any actions, claims, liabilities, injury, loss, loss of use, loss of business, damages, indirect or consequential damages, demands, penalties, fines, expenses (including legal expenses), costs, obligations and causes of action of any kind arising wholly or partly from negligence or omission of the user or the misuse, incorrect application, unsafe application, incorrect storage and handling, incorrect installation, lack of maintenance, improper maintenance or improper operation of products furnished by the Company.
PAYMENT: All payments shall be remitted to:
CCI Thermal Technologies Inc.
5918 Roper Road
Canada T6B 3E1